This calculator gives you information on the zero and span adjustability of transducers with the voltage conditioner electrical output feature. To use this calculator:
- Determine which OUTPUT you require according to columns A, B, and C.
- Complete the INPUT column variables corresponding to the output you require and press the Calculate button for the column of interest.
- Note: "unit displacement" can be inches, mm, °, or other units of displacement.
|
OUTPUTS |
A |
B |
C |
Unit of Measure |
|
zero control |
0 to 100 |
% of span |
||
|
max voltage span for transducer's displacement (actual) |
0.889 |
VDC |
||
|
min voltage span for transducer's displacement (actual) |
0.356 |
VDC |
||
|
max sensitivity |
0.222 |
V/unit displacement |
||
|
min sensitivity |
0.089 |
V/unit displacement |
||
|
max transducer's range (design) |
unit displacement |
|||
|
min power supply voltage required |
VDC |
|||
|
DEMONSTRATION OF OUTPUT FLEXIBILITY |
|||||
|
For the variables shown in column A above, below are examples of the voltage conditioner's output flexibility. |
|||||
|
The voltage span can be varied from minimum to maximum or anywhere in between and is user-settable. |
|||||
|
single-ended, maximum span |
0 to 0.889 VDC |
||||
|
single-ended, minimum span |
0 to 0.356 VDC |
||||
|
differential, maximum span |
-0.444 to 0.444 VDC |
||||
|
differential, minimum span |
-0.178 to 0.178 VDC |
||||
|
single-ended, zero control at 100% of range |
-0.889 to 0 VDC |
||||
voltage conditioner block diagram
Other calculators:
- Thermal Effect
- Sinusoidal Motion
- Displacement Cable Sag (Catenary Curve)
- Displacement Cable Stretch
- Position Transducer Linearity (Calibration)
- Sensor Total Cost of Ownership
- Cable (String) Fundamental Frequency
- Potentiometer-Based Position Transducer Voltage Divider and Power Calculator
No Warranties: This calculator and information are provided "as is" without any warranty, condition, or representation of any kind, either express or implied, including but not limited to, any warranty respecting non-infringement, and the implied warranties of conditions of merchantability and fitness for a particular purpose. In no event shall SpaceAge Control, Inc. be liable for any direct, indirect, special, incidental, consequential or other damages howsoever caused whether arising in contract, tort, or otherwise, arising out of or in connection with the use or performance of the information contained on this Web page.